Emergency Tyre Repair Kit – Heavy Duty Puncture Fix for Car Motorcycle,Van Truck

Item Specifications

Seller Warranty: 1 Year

Item Diameter: 8mm Thick Strips

Manufacturer Part Number: EBTPK01

Compatible Model: Compatible With All Vehicles

Material: Rubber, Steel, Plastic, Glue Compound

Item Length: 100mm Strips

Superseded Part Number: ebtpk01

Reference OE/OEM Number: EBTPK01

Placement on Vehicle: Front Wheel,Rear Wheel,Left,Right

Colour: Black

Brand: eBreaker

Interchange Part Number: ebtpk01

Unit Type: Unit

Compatible Make: Compatible With All Tyres

Manufacturer Warranty: 1 Year

Classic Part: No

Universal Fitment: Yes

Unit Quantity: 5 Strips, 2 Tools, 1, Sealant Glue Tube

Compatible Year: All Years

Country of Origin: United Kingdom

Performance Part: No

Emergency Tyre Repair Kit – Heavy Duty Puncture Fix for Car Motorcycle,Van Truck




OEM Quality Replacement Car Parts

This heavy-duty tyre puncture repair kit is designed for quick, effective roadside or workshop repairs on tubeless tyres.

Suitable for cars and motorcycles, it allows you to seal punctures caused by nails or screws without removing the tyre from the wheel.

The kit includes solid steel hand tools for durability and control, along with strong rubber repair strips and adhesive solution to create a long-lasting seal.

Ideal for emergency use or keeping in the boot, garage, or workshop.

The repair process is simple: locate the puncture, clean the hole using the rasp tool, insert a coated repair strip with the insertion tool, trim flush, then reinflate the tyre and check for leaks.

This kit is intended for tubeless tyres (Nearly all are these days) and is not suitable for sidewall damage or large tears.

What’s in the kit.
Spiral reamer tool = roughens/cleans the hole.
Insertion tool (split-eye needle) = pushes the sticky strip in.
5 Repair strips (strings) = the actual plug.
Rubber solution (cement/lube) = helps insertion + seals.

How to use Guide.

Step-by-step: Plug the puncture.

1) Make it safe

Pull over somewhere safe and flat.

Handbrake on, hazards on.

If you’ve got one, put a warning triangle behind the car.

Find the puncture (listen for hiss, look for screw/nail).

2) Remove the object

Use pliers to pull out the nail/screw.

Mark the hole location so you don’t lose it.

3) Ream the hole (clean + size it)

Push the spiral reamer into the puncture hole.

Work it in and out several times (and twist) to roughen the rubber.

Leave the reamer in the hole while you prep the strip (helps stop air loss).

4) Prep the repair strip

Take 1 repair strip.

Thread it halfway through the insertion tool (so it’s equal both sides like a moustache).

5) Add rubber solution

Put rubber solution on the strip, and a little into the puncture hole (or on the insertion tool).

This is both lubricant + seal assist.

6) Insert the strip

Remove the reamer.

Immediately push the loaded insertion tool into the hole.

Push until about 2/3 of the strip is inside and ~10–15mm (½") remains outside.

7) Pull the tool out (leave the plug in)

Pull the insertion tool straight back out with a firm motion.

The split-eye design should release the strip and leave it lodged in the tyre.

8) Trim the excess

Cut the exposed strip down to roughly 2–3mm proud of the tread.

Don’t cut it flush to nothing — leave a tiny bit.

9) Inflate and check for leaks

Re-inflate to the recommended tyre pressure.

Check for leaks: Best: soapy water on the repair area — bubbles = leak.

If it bubbles, you may need to re-ream and redo with a fresh strip.

10) Drive and re-check

Drive gently for a few miles.

Re-check tyre pressure later the same day and again the next morning.




Quick “don’t be an idiot” safety notes (said with love)
Sidewall puncture = bin it / replace tyre.
If the hole is big (like a torn chunk) this kit is not magic.
Treat this as an emergency repair unless a tyre professional confirms it’s acceptably long-term.
If you’ve got TPMS, this usually still works, but don’t ignore warnings afterwards — check pressure.




Returns & Warranty: All Products have a 1-Year Warranty & 30-day no-quibble returns.

Wrong part or Damaged ? = Replacement or Refund. All Covered by eBay Buyer Protection.

Compliance/Safety Note (GPSR/GDPR): Meets UK/EU General Product Safety Regulations. Customer data handled per GDPR, never stored beyond order.

Need help? Message us your VIN for instant advice. After sales support—always.

Why buy from e-breaker?

Trade-trusted, OE quality, 20+ years on eBay, based in South Yorkshire, UK-held stock, VAT invoice on request, after sales support, never drop-shipped. Trusted by garages and DIY users alike. Straight-talking, no-nonsense Yorkshire support.

VAT: 426 6071 04 | Company No: 14430440 | eBkr | eBay: e-breaker